Home
Product Directory
Instruments & Meters
Electronic Instrument
Other Electronic Instruments
Product Description
Company Info
Product Description
Main features
1. In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 100 Base-TX, IEEE802.3z standard.
2. Built in 128Kb RAM for data buffer.
3. Back pressure flow control for full duplex; IEEE802.3 X and half duplex.
4. Automatic identification of MDI/MDI-X cross line.
5. In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical parameters
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX and IEEE802.3z standard
2. Connector: One UTPRJ-45 connector, oneSC/STconnector
3. Operation mode: Full duplex mode or half duplex mode
4. Power supply parameter: Built-in: 110-265V AC
5. Environmental temperature: 0-50 degree
6. Relative humidity: 5%-90%
7. TP cable: Cat5 UTP cable
8. Transfer fiber:
Multi-mode: 50/125, 62.5/125 or 100/140μ M
Single mode: 8.3/125, 8.7/125, 9/125 or 10/125μ M
9. Dimensions: Built-in power supply: 165mm(L) * 130mm(W)* 28mm(H)
Commodity introduction:
10/100/1000M Media Converter User Manual ( Click here to download the document )
Installation 1. Interface RJ-45 interface The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire Fiber interface SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber). 2. Connection The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then optical converter on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp) Explanation for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each LED indicator lamp.
1. In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 100 Base-TX, IEEE802.3z standard.
2. Built in 128Kb RAM for data buffer.
3. Back pressure flow control for full duplex; IEEE802.3 X and half duplex.
4. Automatic identification of MDI/MDI-X cross line.
5. In conformity to safety code of FCC and 15 CLASS A and CE MARK.
Technical parameters
1. Standard Protocol: IEEE802.3 10 Base-T standard
IEEE 802.3u 100Base-TX and IEEE802.3z standard
2. Connector: One UTPRJ-45 connector, oneSC/STconnector
3. Operation mode: Full duplex mode or half duplex mode
4. Power supply parameter: Built-in: 110-265V AC
5. Environmental temperature: 0-50 degree
6. Relative humidity: 5%-90%
7. TP cable: Cat5 UTP cable
8. Transfer fiber:
Multi-mode: 50/125, 62.5/125 or 100/140μ M
Single mode: 8.3/125, 8.7/125, 9/125 or 10/125μ M
9. Dimensions: Built-in power supply: 165mm(L) * 130mm(W)* 28mm(H)
Commodity introduction:
10/100/1000M Media Converter User Manual ( Click here to download the document )
Installation 1. Interface RJ-45 interface The transmission media adopts CAT5 twisted-pair with typical length of 100 meter. It features the function of automatically identifying the through line and cross wire Fiber interface SC/ST fiber interface is of duplex mode type, including two interfaces, namely TX and RX. When the two sets of optical transceiver are interfaced or connected to switch with fiber interface, the fiber is in cross connection, namely "TX-RX", "RX-TX" (direct butting for single optical fiber). 2. Connection The network device (work station, hub or switch) with RJ-45 interface is connected to RJ-45 jack of optical transceiver through twisted-pair. And the multi/single mode fiber is connected to SC/ST fiber interface of the optical transceiver. Then optical converter on. The corresponding LED is on for correct connection. (See the table below for the LED indicator lamp) Explanation for LED indicator lamp LED indicator lamps serve as device monitoring and trouble display. The following is the explanation for each LED indicator lamp.
Address:
6f, 12b, Zte Industrial Zone, Venture Road, Nanshan District, Shenzhen, Guangdong, China
Business Type:
Manufacturer/Factory, Trading Company, Other
Business Range:
Computer Products, Electrical & Electronics, Manufacturing & Processing Machinery
Main Products:
Fiber Media Converter, Modular Switch, Fiber Switch, Industrial Media Converter, IP Camara
Company Introduction:
Shenzhen Anky Technology Co., Ltd., etablished in 2003, is a professional manufacturer specializing in fiber date communication. We focus on researching and producing all series of media converters and fiber switch in the field of fiber communication.
At the beginning of 2006, Shenzhen Anyk Technology Co., Ltd. Released all series of media converters aiming at the development of fiber communication market and gained a lot of custommers` commendation in the market.
Shenzhen Anky Technology Co., Ltd. Possesses absolute research and development team and testing platform. All the products have intellectual property rights, especially 17 slots rack type network managed media converter, as a representative, enhancing the function of this kind of media converter and reducing the cost of hardware at the same time to a large extent.
The design, manufacture and suppliers` accessories of Shenzhen Anky Technology Co., Ltd. `s products have passed ISO9001. Shenzhen Anky Technology Co., Ltd. Provides our customers with the highest quality products and excellent service on the basis of professional team and pragmatic style.
With the development of philosophy "Going in for timeless development step by step, the pursuit of excellence, the contributions of value", Shenzhen Anky Technology Co., Ltd. Will release new products with high quality continuously, satisfy customers` practical needs, resolve sorts of problems customers suffering from and ensure delivering products to customers in time and reliably in an efficient and pragmatic work style.
At the beginning of 2006, Shenzhen Anyk Technology Co., Ltd. Released all series of media converters aiming at the development of fiber communication market and gained a lot of custommers` commendation in the market.
Shenzhen Anky Technology Co., Ltd. Possesses absolute research and development team and testing platform. All the products have intellectual property rights, especially 17 slots rack type network managed media converter, as a representative, enhancing the function of this kind of media converter and reducing the cost of hardware at the same time to a large extent.
The design, manufacture and suppliers` accessories of Shenzhen Anky Technology Co., Ltd. `s products have passed ISO9001. Shenzhen Anky Technology Co., Ltd. Provides our customers with the highest quality products and excellent service on the basis of professional team and pragmatic style.
With the development of philosophy "Going in for timeless development step by step, the pursuit of excellence, the contributions of value", Shenzhen Anky Technology Co., Ltd. Will release new products with high quality continuously, satisfy customers` practical needs, resolve sorts of problems customers suffering from and ensure delivering products to customers in time and reliably in an efficient and pragmatic work style.
